Make CustomQR Code
Printing

QR Code Size for Print: Minimum Sizes for Cards, Flyers and Posters

How big should a QR code be? The minimum print size, the 10:1 distance rule, sizes for business cards, flyers, posters and signs, plus file format and DPI tips.

By the Make Custom QR Code team5 min read

Too small and a QR code won't scan; too big and it eats your design. Here are the numbers we use, and the reasons behind them.

The minimum size: 2 cm (0.8 in)

For a code holding a short link and scanned up close, 2 × 2 cm (0.8 × 0.8 in) is the practical minimum. Below that, phone cameras struggle to focus and the squares blur together in print.

That minimum goes up as the code holds more data. A contact card (vCard) code or a long URL has many more squares, so each one is smaller at the same size. Give those codes at least 2.5–3 cm (1–1.2 in).

The 10:1 rule for distance

A QR code scans reliably from about 10 times its width. Flip it around to size a code: measure how far away people will be, and divide by 10.

Scanning distanceMinimum code width
20–30 cm (hand-held)2–3 cm (0.8–1.2 in)
50 cm (table, counter)5 cm (2 in)
1 m (shop window, wall)10 cm (4 in)
2 m (poster across a room)20 cm (8 in)
5 m (banner, sign)50 cm (20 in)

Treat these as minimums. If people will scan in poor light or at an angle, go bigger.

Recommended sizes by item

ItemRecommended size
Business card2–2.5 cm (0.8–1 in); 2.5 cm+ for a vCard
Product label, sticker2–3 cm (0.8–1.2 in)
Flyer, leaflet (A5/A4)3–4 cm (1.2–1.6 in)
Table tent, menu4–5 cm (1.6–2 in)
Poster (A3/A2)8–15 cm (3–6 in)
Window, wall sign15–30 cm (6–12 in)

Don't forget the margin

The size above is for the code itself. Around it you need a blank border, called the quiet zone, so scanners can find the edges. Keep text, borders and other graphics out of it. Our maker adds a margin automatically, and you can change it in Design → Advanced.

File format and resolution

  • SVG is best for print. It's a vector file, so it's sharp at any size, from a sticker to a billboard. Our SVG download is free.
  • PNG needs enough pixels. Aim for 300 pixels per inch of printed size. A 2048 px PNG prints sharp up to about 17 cm (6.8 in) wide.
  • Never enlarge a small screenshot of a QR code. The edges go soft and scanning gets unreliable.

Pre-print checklist

  1. Code is dark on a light background, with strong contrast
  2. Size follows the 10:1 rule for where it will be scanned
  3. Clear margin on all four sides
  4. Matte finish behind the code if possible
  5. One test print scanned with two or three different phones

If a test print fails, our QR code troubleshooting guide covers every common cause. Or make a fresh code and download it as SVG.

Questions

What is the minimum size for a QR code?

About 2 × 2 cm (0.8 × 0.8 in) for a code holding a short link, scanned up close. Codes with more data, like a contact card, should be at least 2.5–3 cm (1–1.2 in).

How far away can a QR code be scanned?

Roughly 10 times its width. A 3 cm code scans from about 30 cm away; a 30 cm code on a poster scans from about 3 metres.

What file format is best for printing a QR code?

SVG (vector), because it stays sharp at any size. If your printer needs PNG, export at least 300 pixels for every inch you'll print.

Make a QR code that never expires

Free means free: no sign-up, no trial, no watermark, and static codes nobody can switch off.

Make your QR code

Keep reading