QR Code Not Scanning? 11 Fixes That Actually Work
Low contrast, too small, no margin, inverted colours, too much data, or a dead link: the real reasons QR codes won't scan, and how to fix each one.
By the Make Custom QR Code team7 min read
A QR code that won't scan is nearly always one of a handful of problems, and most can be fixed in a minute. Work through these in order. The first five cover the vast majority of cases.
1. Not enough contrast
Scanners look for dark squares on a light background. Pastel-on-white, grey-on-grey, or a code printed over a photo is the number one reason codes fail. Fix: make the code much darker than its background. Near-black on white is safest; a deep navy, burgundy or forest green also works well.
2. Light code on a dark background
Inverted codes (white dots on black) look stylish, but some phones and many older scanner apps can't read them. Fix: keep the code dark and put a light box behind it. If you must invert, test on several phones, including an older Android.
3. Printed too small, or scanned from too far
A good rule is that a code can be scanned from about 10 times its width. A 2 cm code works at arm's length; a code on a poster across the room needs to be much bigger. Fix: see our QR code size guide for exact numbers.
4. No margin around the code
QR codes need a blank border, called the quiet zone, so the scanner can find the edges. Text, a border or the edge of the paper right up against the code confuses it. Fix: leave clear space around all four sides, about the width of one of the three big corner squares' outer ring, or more.
5. Too much data in one code
The more you put in a code, the more and smaller its squares get. A long tracking URL or a contact card with every field filled in can produce a dense code that blurs when printed small. Fix: shorten the link, remove tracking parameters you don't need, or print larger. For business cards, a link to your site makes a simpler code than a full vCard QR code.
6. Blurry or low-resolution file
A small PNG stretched to fit a poster will have soft, fuzzy edges. Fix: download the SVG (vector) version for print, or a PNG at least as large as you'll print it at 300 DPI. Our SVG and transparent download is free.
7. Glare, curves and shiny surfaces
Gloss lamination, foil, metal and curved bottles reflect light and bend the pattern. Fix: use matte finishes behind codes, avoid wrapping a code around a tight curve, and make codes on cans and bottles a bit larger.
8. Over-designed corners or logo
Custom shapes are fine, but the three big corner squares (the "eyes") must stay recognisable, and a logo in the middle can only cover so much before the code breaks. Fix: keep the eyes high contrast and raise error correction if you add a logo. The live scan check in our maker tells you if a design still reads.
9. It scans, but the link is broken
If your phone shows a link but the page fails to load, the code is fine; the content is wrong. A typo, a page that was moved, or a missing https:// on an unusual link are common. Fix: scan it, read the link carefully, and open it on a laptop to check.
10. It was a dynamic code that's been switched off
If scanning opens an error, an ad, or a "this QR code has expired" page from a QR company, the code was dynamic and the trial or subscription ended. Fix: make a static replacement. Read do QR codes expire? for the full story.
11. It's the phone, not the code
- iPhone: Settings → Camera → turn on "Scan QR Codes" (called "Scan Detected Codes" on newer iOS). Hold steady 15–30 cm away.
- Android: if the camera ignores codes, use Google Lens or the QR scanner tile in quick settings.
- Wipe the camera lens, turn up screen brightness when scanning a screen, and add light in dim rooms.
Test before you print
Print one copy at the real size, then scan it with two or three different phones, from the distance people will actually stand. It takes two minutes and saves a reprint. When you're ready, make your code here: it's free, and every design gets a scan check before you download.
Questions
Why won't my QR code scan?
The most common causes are low contrast between the code and its background, a code printed too small, no blank margin around it, light-on-dark (inverted) colours, or too much data. If it scans but nothing opens, the link inside is broken or the code was a dynamic code that's been switched off.
Why won't my iPhone scan QR codes?
Check Settings → Camera and make sure “Scan QR Codes” (or “Scan Detected Codes”) is on. Then hold the phone 15–30 cm from the code, steady, until a yellow link appears.
How do I scan a QR code on Android?
Open the camera app and point it at the code. If nothing happens, use Google Lens (in the Google app or the camera's Lens mode), or the QR scanner in the quick settings panel.
Make a QR code that never expires
Free means free: no sign-up, no trial, no watermark, and static codes nobody can switch off.
Make your QR code